Skip to main content
 

product information

SIHGA® tip
Note design recommendations. On flat roofs in combination with JustiFix® K.
height-adjustable distance between substructure and any foundation
this adjustable foot saves up to 70 % working time compared to individual solutions
JustiFix® II JK:
  • upper section for TefaFix® T substructure and SymbioFix® SFT; ntegrated level equaliser
    this height-adjustable foot simply latches onto TefaFix® T and SymbioFix® SFT is therefore absolutely installation-stable and evens out slopes of up to 3 %
  • 30 to 545 mm height adjustment
    four basic models for the individual application, can be varied with JustiFix® Adapter JA 70
  • base plate with diameter 210 mm and rounded edge
    large supporting surface, also for soft subsoil, rounded standing areas to protect the underlying films
  • load capacity per piece max. 6.0 kN
    on solid and unpaved subsoil; 2 per m², for example with 1100 mm distance from the terrace footing, are sufficient
JustiFix® II JK H:
  • upper section for wood substructure; integrated level equaliser
    versatile in application, the wood substructure is simply fastened to the side of the upper section, evens out slopes of up to 3 %, simply read off from table
  • 50 to 545 mm height adjustment
    four basic models for the individual application, can be varied with JustiFix® Adapter JA 70
  • base plate with diameter 210 mm and rounded edge
    large supporting surface, also for unpaved subsoil, rounded standing areas to protect the underlying films
  • load capacity per piece max. 6.0 kN
    on solid and unpaved subsoil
made in Austria
top European quality and added-value
monitored production from polypropylene, with a special recipe
remains permanently dimensionally stable, is heat-, frost- and UV-resistant
includes installation instructions
for professional and practical work without lost time